724-571-5770 YouTube

Planet Eclipse Geo2 Paintball Gun - Shiner


Your Price $1,250.00

Taking the knowledge acquired and the feedback gleaned since the launch of Geo, the Geo2 has been modified in virtually every area. From efficiency, to balance, to electronics and regulation, the Geo has been improved, and in key areas such as the ability to shoot the most fragile paint possible, the Geo2 simply excels……On top of these there are the dominant Geo features that have been brought through to the latest creation, such as the ISCIS valve system, low dynamic seal count, Cure bolt technology, Deftek feed, Break-Beam Sensor System, OOPS ASA, Clamping feed, tool-less maintenance as well as access to the Planet Eclipse Technical and Customer Support network making teching a breeze.

Key Features:

  • Gen2 Propshaft Assembly – The Geo2 comes with a completely new Propshaft Assembly. The design introduces a spring-loaded Drive Core. This Drive Core prevents air loss both on the firing stroke of the bolt, leaving residual, previously wasted air trapped in the valve chamber, as well as ensuring the valve chamber is fully sealed prior to re-filling on the return stroke of the bolt. This results in better efficiency and faster recharge of the valve chamber. The New Finned Propshaft Tip helps keep the propshaft and bolt concentric at all times.
  • SL3 In-Line Regulator – The SL3 regulator is more accurate, more consistent, with less creep and faster recharge than any previous Eclipse Regulator. On top of that it will allow the Geo2 to operate with LP, MP or HP tanks with no fluctuation in performance or velocity. Switch from HP tank to LP tank without needing to adjust the regulator. The New design means that the Geo2 will shoot down to the last 200psi of tank pressure with next-to-zero loss in velocity. The new SL3 regulator also has a reversible and replaceable reg seal.
  • Shaft4 Barrel – The Shaft4 has been developed specifically to improve efficiency and consistency. By manipulating the length and bore of the rear control bore section the new barrel gives higher velocities than older Shaft barrels for the same settings. This leads to an improvement in efficiency and consistency as well as reducing the sound signature of the marker.
  • Geo2 GST Bolt Assembly – After the phenomenal success of the GST kit for the Geo, the Geo2 receives the same treatment as standard. GST Can and GST Geo2 bolt now work in conjunction with the new spring Drive Core to further reduce recoil and sound signature, making the Geo2 supremely smooth and quiet.
  • 2010 Circuit Board – New Circuit Board has 92% larger LCD screen with adjustable backlight color. Optimized solenoid drive circuitry offering increased accuracy of Dwell and ROF control. 16-bit, 16mips PIC microprocessor. Micro and Opto trigger sensing. New GUI (Graphical User Interface)
  • Eportal Connectivity – Capable of connecting the Geo2 to a PC giving the ability to upload Firmware, make Splash Screens and remotely adjust parameters. (Requires Optional USB Adaptor, Software and Cable)
  • Wider Frame-to-Reg Spacing – An increase in the stance of the Geo2 changes the basic feel of the marker and allows higher rear hand placement. New 2010 bearing carrier also allows higher trigger placement to match the higher rear hand position resulting in a more instinctive and pointy feel to the marker.

Geo 2 Features:

  • Shaft4 Barrel 14”/0.689” – Longer, tighter control bore improves efficiency and consistency
  • 92% Larger Multicoloured Transflective LCD Module
  • Ego10-Style Grip Frame and Grips
  • Extended Grip Pitch – Increased Comfortable and Stability
  • Spool Valve Design
  • Low Reciprocating Mass – Bolt 17g
  • ISCIS (Innovative Solenoid Controlled Isolation System) Mechanism
  • SC (Spool-Cure) Bolt – helps eliminate 2nd ball clipping in the feed stack.
  • 6-Second Strip Down – To remove and separate all internal Bolt components
  • Tool-less Bolt removal – all internal bolt components removed without tools
  • BBSS (Break Beam Sensor System)
  • Def-Tek Offset Feed
  • C-Lever Clamping Feedneck with Sprocket Wheel
  • Dual Selectable Trigger Switching – Opto and Micro Switches
  • Dual Trigger Return Mechanisms – Spring and Magnetic Return
  • Integrated Audible Beeper for Alarms and Actuations
  • Capped and Uncapped Ramp Modes
  • All Major Tournament Presets
  • 9 Preset Debounce Modes
  • 5-Point Adjustable Trigger
  • T-Rail Mounting System
  • OOPS – On/Off/Purge ASA System

Geo2 Specifications:


  • Weight 883g/1.94lb (including Shaft4 Barrel,Battery,Feed,OOPS)
  • Length 526mm (including 14 " Shaft4 Barrel)
  • Height 198mm
  • Width 31mm


  • Body 6061-T6 Aluminium
  • Barrel 6061-T6 Aluminium
  • Frame 6061-T6 Aluminium
  • Feed 6061-T6 Aluminium
  • Eye Covers 6061-T6 Aluminium


  • Interface 3 Button on frame with tourney lock on PCB
  • Display Transflective LCD w/ Tru-COlor Adjustable backlite
  • Solenoid Voltage 5v
  • Processor Voltage 3v
  • Processor 16-Bit 16 MIPS
  • Power Supply 1 x 9v (PP3) Battery
  • Eportal Compatible * sold separately


  • ASA Mount T-slot mounted adjustable rail with OOPS
  • Trigger Methods Micro-switch and Break Beam opto-switch
  • Trigger Mechanism Coil spring and magnetic return
  • Trigger Pivot Dual instrument ball race units mounted in bearing carrier
  • Barrel 2-Piece Micro Honed Shaft4 14" length 0.689" Bore
  • Feed Tube Lever operated Clamping Feed with Sprocket Thumb Wheel


  • Operating Principle Spool Valve
  • Solenoid Type Custom MAC Solenid valve
  • Drive Mechanism Sprung Loaded Drive Core Propshaft and GST Can
  • Bolt Mechanism Spool Cure2 Bolt


  • Grip Type Contoured dual density grip
  • Grip Pitch 161.3mm


  • Firing Modes Semi & Ramping capped and uncapped
  • Debounce Modes 10 Debounce Modes

Write a Review


Customer Reviews

Quick Links
Contact Us:                                        
(724) 571-5770


Mailing List

Please Wait... processing